Heatpipe heatsinks for powerful heat removal
Efficient heat transfer from the source to the cooler
A key feature of heatpipe heat sinks is the utilisation of the phase transition of a liquid within small, highly thermally conductive copper tubes (heat pipes): When heated at the heat source, the water in the heat sink pipe evaporates and condenses again at colder points. This enables heat to be transferred quickly and efficiently to another location. Heat pipe cooling (heat pipe sink) combines the advantages of heat pipes with those of traditional and cost-effective heat sinks, such as extruded aluminium heat sinks. This results in a compact design and makes heat pipes ideal for applications where space is limited. In addition, heatpipe heat sinks operate passively: they require no external power source and contain no moving parts, which makes them particularly reliable.
Advantages of heatpipe cooling solutions
- Very good heat conduction
- Even temperature distribution
- Ideal for heat dissipation in confined installation situations
- Can be combined with various production technologies
- Heat dissipation over long distances possible
- Design freedom by increasing the number of heat pipes
- Can be installed largely independent of position
- Robust and low-maintenance design
The perfect team for CPU coolers: heatpipe + heat sink + fan
To increase performance, heatpipe coolers are combined with active fans, particularly in PCs, to dissipate the high power loss of microprocessors more quickly. Their ability to dissipate heat over greater distances also offers design freedom. This makes them the preferred choice for high-performance components in desktop computers, notebooks and compact electronics in a wide range of applications.
CPU fans from EKL CPU fans from Alpenföhn®
CPU fans from EKL CPU fans from Alpenföhn®
EKL: Your heat pipe sink manufacturer
EKL offers you a wide range of solutions, from individual components as an assembly set to fully soldered heatpipe coolers. The use of high-quality copper heatpipes guarantees a long service life with consistent thermal conductivity. Through skilful combination with other cooling technologies and manufacturing technologies, we always find the right and cost-conscious cooling solution for your project. With over 30 years of experience in cooling high-performance electronic components, we are your reliable partner. When designing the ideal cooling solution for your application, we not only take into account the cooling capacity required from the available installation space. Depending on the required quantity, we design not only the best but also the most cost-optimised cooling solution for you.
Let's talk about your cooling task!
Danny Weimer
Sales Department
+49 (0)7561 9837-28
d.weimer@ekl-ag.de
Make an appointment Enquiries by e-mail
Danny Weimer
Sales Department
+49 (0)7561 9837-28
d.weimer@ekl-ag.de
Make an appointment Enquiries by e-mail
Applications for heat pipe cooling solutions
Applications for this innovative technology can be found in particular in electronic systems that require efficient dissipation of power loss due to their cramped design or very high heat generation.
In IT server and computer technology, heatpipe CPU coolers are often used to cool processors and graphics cards in workstations and PCs, as PC heat pipes enable rapid heat transfer.
In notebooks and laptops, heatpipe CPU coolers are ideal for use in portable devices due to their compact design, where space and weight are decisive factors. This is why they are sometimes referred to as notebook heat pipes.
In electromobility , heatpipe heat sinks are used in charging stations, but also in stationary battery storage systems to cool their control units, voltage converters and rectifiers.
In lighting technology, modern LED lighting generatesconsiderably less heat than classic halogen lighting, but LED technology is also more heat-sensitive - especially with high-performance LED lamps, the high heat development must be dissipated quickly using heat pipe LED cooling.
In the telecommunications industry,heat pipe heat sinks are used to cool high-performance transmission systems.
In notebooks and laptops, heatpipe CPU coolers are ideal for use in portable devices due to their compact design, where space and weight are decisive factors. This is why they are sometimes referred to as notebook heat pipes.
In electromobility , heatpipe heat sinks are used in charging stations, but also in stationary battery storage systems to cool their control units, voltage converters and rectifiers.
In lighting technology, modern LED lighting generatesconsiderably less heat than classic halogen lighting, but LED technology is also more heat-sensitive - especially with high-performance LED lamps, the high heat development must be dissipated quickly using heat pipe LED cooling.
In the telecommunications industry,heat pipe heat sinks are used to cool high-performance transmission systems.
The versatile cooling technology of heat pipes offers a reliable solution for thermal management in a variety of electronic systems.
EKL manufacturing processes for heat pipe cooling solutions
Brilliant physics: this is how heat transport works in a heat pipe
A heat pipe is an efficient heat transfer mechanism based on a two-phase heat transfer principle. It is a metallic, tubular body that is hermetically sealed and can transfer heat over long distances with minimal losses. These components are particularly common in the computer industry, where they are used in CPU coolers to transfer heat from the contact surface to the cooling fins. The heat is absorbed at the evaporation end of the heat pipe and released into the ambient air at the condensation end. The transport process utilises the latent heat of evaporation and condensation in the adiabatic section of the heat pipe. An internal vacuum lowers the boiling point and thus enables heat transfer at lower temperatures.
- 30 years of experience
- Engineering in Germany
- Full Service Heat Sink
- Cost-efficient development
- Fast market launch
- Maximum quality
EKL - Everything from a single source
The temperature of electronic components must remain within the tolerated range, as excessive heating can shorten their service life and impair their performance. EKL provides you with expert support in solving these heat problems efficiently and economically using passive heat sinks, fans, heat pipes, liquid heat sinks or other thermal management technologies.
EKL is therefore your perfect solution partner for cost-optimised temperature regulation of all components in your electronic device. We are at your side in every project phase, from the initial idea, design and prototype construction through to series production - and beyond!
The temperature of electronic components must remain within the tolerated range, as excessive heating can shorten their service life and impair their performance. EKL provides you with expert support in solving these heat problems efficiently and economically using passive heat sinks, fans, heat pipes, liquid heat sinks or other thermal management technologies.
EKL is therefore your perfect solution partner for cost-optimised temperature regulation of all components in your electronic device. We are at your side in every project phase, from the initial idea, design and prototype construction through to series production - and beyond!
Personal point of contact
From the initial project phase to the delivery of your customised cooling technology, you will always have a personal point of contact at EKL We are always available to provide you with competent and responsive support.
Full service from the idea to logistics
Concentrate your core competence on product development. We offer all project services relating to cooling - from the initial consultation, idea development and thermal simulation, prototype construction and optimisation, through to punctual delivery and reliable logistics and warehousing.
Variety of manufacturing technologies
We are one of the heat sink manufacturers with the widest range of manufacturing technologies. This enables us to offer a service portfolio that is designed for the development and production of your truly best cooling solution - at an excellent price-performance ratio.
Performance optimisation + cost optimisation
EKL actively supports you in reducing your manufacturing costs without compromising quality or performance. Product cost reduction is an important aspect that we achieve for you through efficient design, careful material selection and reliable manufacturing partners.
Pre-assembled assemblies + packaging
We actively assist your production staff by supplying pre-assembled assemblies. This not only reduces your labour costs per device, but also guarantees the highest quality. Your sensitive heat sinks or assemblies are protected for transport using customised packaging.
Warehouse and logistics in Germany
With over 1100 pallet spaces, we offer tailor-made logistics solutions and minimise your storage costs through stockpiling and consignment stock, just-in-time deliveries, coordinated delivery schedules and flexible shipping options for individual requirements.
The EKL project stages for your cooling solutionChoose your point of entry!
Our offer is as flexible as your needs. Are you still early in the development phase and want an idea generator for the best cooling solution? Do you have a ready-made device that gets too hot? Or are you simply looking for an alternative or additional supplier for a heat sink already used in series production? In EKL you will always find a flexible, agile and responsible partner for the cooling of your electronic components and complete systems, whatever the project phase. We look forward to your enquiry!
Counselling
Concept
Concept
In personal contact and open dialogue with you, our engineers create the creative space and framework to design the best cooling solution for your requirements from the wealth of options available.
Development
Feasibility / simulation
Feasibility / simulation
We test the idea for your heat sink virtually in the thermal simulation. Realistic computer simulations allow variations in manufacturing processes, system structures and other parameters.
Performance optimisation
Even a well-functioning heat sink can still be optimised. We determine the "how" and "how much" by simulating different materials or cooling technologies, for example, as well as simulating various environmental parameters.
Cost optimisation
An expensive heat sink can often be made significantly cheaper by using an alternative manufacturing process. Whether with the same or application-specific performance: we support your product development in reducing costs.
Production drawing
Prototype construction
Prototype construction
Prototypes from our design department enable early testing and targeted solutions to problems in your device. We create your functional and design prototypes with our in-house CNC production.
Series production
small to large
small to large
By manufacturing in-house and in Asia, we can offer all types of heat sinks from small to large series at competitive unit prices. We impress our long-standing customers with our consistently high quality.
Sampling
Incoming goods inspection
Incoming goods inspection
We make no compromises when it comes to quality: Development takes place in Germany and all series products are analysed by our German test laboratory according to test plans using state-of-the-art methods.
Surface finishing
Anodising, powder coating, painting etc. protect your heat sinks from corrosion and environmental influences. But colour is not just chic, because dark-coloured heat sinks also emit more radiant heat.
Assemblies
Pre-assembly
Pre-assembly
We actively relieve your production with pre-assembled assemblies. This reduces your workload per device and guarantees the highest quality, because as cooling professionals we ensure that the heat sink is optimally attached.
Quality assurance
Test plans
Test plans
We test according to our own and customer-specific test plans using the latest rapid thermal measuring equipment, 3D measuring machines, assembly tests and testing of various application scenarios.
Packaging design
Packaging production
Packaging production
EKL develops and produces customised packaging to optimally protect your sensitive heat sinks or assemblies in the sometimes harsh transport and storage environments.
Warehouse
& Logistics
& Logistics
With large storage capacities, we offer production-related stocking and consignment warehouses, just-in-time deliveries, customised delivery schedules and flexible shipping options for your individual requirements.
Let's talk about your cooling task!
Frank Sichler
Sales Manager
+49 (0)7561 9837-47
f.sichler@ekl-ag.de
Make an appointment Enquiries by e-mail
Frank Sichler
Sales Manager
+49 (0)7561 9837-47
f.sichler@ekl-ag.de
Make an appointment Enquiries by e-mail